NEWS CENTER

A. Commonly used cosmetic packaging materials

　　a. Bottles (including plastic bottles, glass bottles, etc.)

　　b. Caps [including outer caps, inner caps, (plugs, pads, membranes), etc.];

　　c. Bags (including paper bags, plastic bags, composite bags)

　　d. hose (including plastic hose, composite hose, metal hose, etc.)

　　e. box (including plastic paper boxes, plastic boxes, metal boxes, etc.)

　　f. spray cans (including pressure-resistant aluminum cans, tin cans, etc.)

　　g. Ingot tubes (including lipstick tubes, foundation tubes, mascara tubes, etc.)

　　h. Makeup pen

　　i. spray nozzle (including air pressure type, pump type)

　　j. Outer box (including flower box, plastic seal, middle box, transport packaging, etc.).

　　Second, the packaging material requirements

　　Cosmetic products packaging materials used must be safe and should not cause harm to humans.

　　Third, the packaging appearance requirements

　　1、Bottle

　　Bottle should be smooth, smooth surface, the basic thickness of the bottle wall uniform, no obvious scars, deformation, there should be no cold burst and cracks. Bottle mouth should be square, smooth, no application burr (burr mouth), thread, bayonet with structure intact, square. The bottle and cover should be tightly matched, no slippery teeth, loose, no leakage. The bottle should be clean inside and outside.

　　2 Caps

　　(1) Inner cover: The inner cover should be complete, smooth, clean and not deformed. The inner lid should fit well with the bottle and the outer lid. The inner cap should not leak.

　　(2) outer cover: the outer cover should be square, smooth, no broken, cracked, burr (burr mouth). The color of the outer cap should be uniform and consistent. The outer cover thread with the structure should be intact. The color and luster of the outer cover with electrified aluminum or hot stamping should be uniform and consistent. The flip cap should be flexible and no fracture in the connection part. Cover with the bottle should be tight, no slippery teeth, loose.

　　3、Bag:

　　Bags should not apply obvious wrinkles, scratches, air bubbles. Bags should be uniform in color and luster. Bag sealing should be firm, there should be no openings, perforations, leakage of liquid (paste) phenomenon. Composite bags should be firmly compounded and evenly coated.

　　4、Hose:

　　The tube body of the hose should be smooth, neat, uniform thickness, no obvious scratches, color should be uniform. The hose seal should be firm and square, there should be no openings, wrinkles (except for the normal indentation of the mold). The cover of the hose should meet the requirements of 5.3. The composite film of the hose should be free of floating phenomenon.

　　5、Box:

　　Box surface should be smooth and square, there should be no obvious bottom scratch, burr (burr mouth), serious deflated pressure and broken phenomenon. The box should be opened with the appropriate degree of elasticity, take the flower box, do not use your fingers to forcibly peel off, to pinch the edge of the cover, the bottom does not fall from the qualified. Box mirror, contents and box should be firmly affixed, mirror image is good, no bottom scratches and damage.

　　6, spray cans

　　Can body flat, no rust spots, smooth weld seams, no obvious scratches, concave can phenomenon, color should be uniform. Spray cans should be smooth at the mouth of the volume, there should be no wrinkles, cracks and deformation. Spray can cover should meet the requirements of 5.3.2.

　　7, spindle tube

　　The body of the spindle tube should be square and smooth, without cracks and burrs (burr), without obvious scratches, and the color should be uniform. The parts of the spindle tube should be suitable for tightness to ensure that the contents can be spun out or pushed out normally.

　　8、Makeup pen

　　Makeup pen shaft and pen set should be smooth, square, not open glue, paint film is not cracked. Makeup pen pen and pen set with the pen should be loose and appropriate. The color of the makeup pen should be uniform and consistent.

　　9、Nozzle

　　Nozzle should be correct, clean, no damage and cracking phenomenon. Nozzle assembly parts should be intact, to ensure that the spray night smooth.

　　10, printing and labeling

　　Cosmetic packaging printing patterns and handwriting should be neat, clear, not easy to fall off, uniform color and luster. Cosmetic packaging labeling should not be wrong posting, posting, reverse posting, paste should be firmly. Labeling requirements in accordance with GB 5296.3.

　　11, the outer box

　　(1) flower box: flower box should be tightly matched with the box packaging. Flower box should be clean, upright, flat, the box cover is good, no wrinkles, missing edges, missing corners. The adhesive parts of the flower box should be firmly pasted, no paste traces, cracking and mutual adhesion phenomenon. The product is not wrongly installed, omitted, inverted phenomenon.

　　(2) Middle box: The middle box should be tightly matched with the flower box packaging. The box should be clean, square and flat, and the lid should be well covered. The gluing parts of the box should be firmly pasted, without paste marks, cracks and mutual adhesion. The product is not wrongly installed, omitted, or installed backwards. Box labeling should be upright, clean, complete, and according to the need should be marked with the product name, specifications, the number of boxes and the name of the producer.

　　(3) Plastic sealing: Plastic sealing should be firmly bonded, no cracking phenomenon. Plastic sealing surface should be clean, no damage. Plastic seal without misloading, leakage, backwards.

　　(4) Transportation packaging: Transportation packaging should be neat, square, smooth, and firmly sealed. Products are not wrongly installed, omitted, backwards. Transport packaging signs should be clear, complete, properly positioned, and as needed should be marked with the product name, producer name and address, net content, product quantity, the quality of the whole box (gross weight), volume, production date and shelf life or production batch number and use by date.